Search results for " power density"
showing 10 items of 14 documents
Algorithmic Approach for Slot Filling Factors Determination in Electrical Machines
2018
In several industrial sectors, such as electric and hybrid traction, the demand for increasingly efficient and high power density electrical machines has grown considerably over the last few years. The improvement of slot filling factor of the electrical machines is an useful provision to satisfy this request. In particular, this topic has been the subject of interest for the industrial sector in recent years, since the technology of winding processes have evolved and allow an economically sustainable realization of windings with an ordered structure rather than randomly. The winding phase must be supported by an accurate design process in which it is possible to evaluate the maximum slot f…
Effect of TiO2 and Al2O3 Addition on the Performance of Chitosan/Phosphotungstic Composite Membranes for Direct Methanol Fuel Cells
2023
Composite chitosan/phosphotungstic acid (CS/PTA) with the addition of TiO2 and Al2O3 particles were synthesized to be used as proton exchange membranes in direct methanol fuel cells (DMFCs). The influence of fillers was assessed through X-ray diffraction, scanning electron microscopy, thermogravimetric analysis, liquid uptake, ion exchange capacity and methanol permeability measurements. The addition of TiO2 particles into proton exchange membranes led to an increase in crystallinity and a decrease in liquid uptake and methanol permeability with respect to pristine CS/PTA membranes, whilst the effect of the introduction of Al2O3 particles on the characteristics of membranes is almost the op…
Obtaining the electrical model of a power transformer by means of finite element software
2005
Abstract. The behaviour of transformers and inductors working at high-frequencies and high power density can dramatically differ from the ideal or low-frequency operation. Their performance is very dependent on the magnetic material, operating frequency and physical construction. In this paper, finite element analysis (FEA) is used to obtain an accurate characterization of the electromagnetic behaviour of these magnetic components.
Self-Heating Induced Instability of a Non-Linear Inductor in a SMPS: a Case Study
2023
This paper proposes a case study to show that the non-linear operation of a power inductor in a SMPS can induce instability of the control system leading to overheating of the inductor beyond its allowable temperature and to an excessive peak of the maximum current. The case study is performed by a commercial ferrite inductor employed in a synchronous boost converter encompassing a control system to adjust the duty cycle, assuring a constant output voltage. The thermal transient is described by the time domain waveforms and thermal images.
Automatic EMI filter design for power electronic converters oriented to high power density
2018
In this paper, a complete computer aided procedure based on the power density concept and aimed at the automatic design of EMI filters for power electronic converters is presented. It is rule-based, and it uses suitable databases built-up by considering information on passive components available from commercial datasheets. The power density constraint is taken into consideration by imposing the minimization of the filter volume and/or weight; nevertheless, the system in which the automatically designed filter is included satisfies the electromagnetic compatibility standards limits. Experimental validations of the proposed procedure are presented for two real case studies, for which the per…
Optimization of net power density in Reverse Electrodialysis
2019
Abstract Reverse Electrodialysis (RED) extracts electrical energy from the salinity difference between two solutions using selective ion exchange membranes. In RED, conditions yielding a large net power density (NPD) are generally desired, due to the still large cost of the membranes. NPD depends on a large number of physical and geometric parameters. Some of these, for example the inlet concentrations of concentrate and diluate, can be regarded as “scenario” variables, imposed by external constraints (e.g., availability) or chosen by different criteria than NPD maximization. Others, namely the thicknesses HCONC, HDIL and the velocities UCONC, UDIL in the concentrate and diluate channels, c…
<title>Family of devices for the study of laser eam behavior in particular conditions</title>
2002
Laser applications in science and technology are based on the special properties of laser radiation, such as monochromaticity, coherence, beam concentration and high power density. Since the laser was discovered, an ever increasing number of applications have been found for it in the most diversified fields. Despite this, its wide possibilities are still by no means fully known or exhausted. Further development is continually taking place in the design of new systems. The generation of the photons is in itself an optic-electronic process. The trajectory of the laser beam is linear. It could be modified by a lens or by a mirror. We built some devices, in order to know how a laser beam could …
Maximum Net Power Density Conditions in Reverse Electrodialysis Stacks
2018
Reverse Electrodialysis (RED) harvests electrical energy from a salinity gradient. The maximum obtainable net power density (NPD) depends on many physical and geometric variables. Some have a monotonic (beneficial or detrimental) influence on NPD, and can be regarded as “scenario” variables chosen by criteria other than NPD maximization. Others, namely the thicknesses HCONC, HDIL and the velocities UCONC, UDIL in the concentrate and diluate channels, have contrasting effects, so that the NPD maximum is obtained for some intermediate values of these parameters. A 1-D model of a RED stack was coupled here with an optimization algorithm to determine the conditions of maximum NPD in the space o…
EMI Filter Re-Design in a SMPS with Inductor in Saturation
2021
This paper analyzes the design issues of the input EMI (Electro-Magnetic Interference) filter's in a switching mode power supply where the power inductor is operated in saturation. Starting with a SMPS equipped with linear inductor, the input filter is firstly designed to comply with Standards. Then, a new inductor with a smaller core size is employed in the same SMPS to exploit saturation. The EMI filter is re-designed, taking into account the increase of EMI introduced by the non-linear operation of the inductor. Finally, the reduction of the inductor's size and cost is compared with the increased size and cost of the EMI filter.
Non-Linear Inductors Characterization in Real Operating Conditions for Power Density Optimization in SMPS
2021
The exploitation of power inductors outside their linear region in switching converters can be achieved by raising the current until a decreasing of the inductance can be noticed. It allows using a smaller magnetic core increasing the power density of the converter. On the other hand, a detailed description of the magnetization curve including the temperature is required. Since this information is often not included in the inductor’s datasheets, this paper shows how to identify the behavior of an inductor when it is operated up to saturation and its temperature rises. In order to characterize the inductor in real operating conditions, a dedicated measurement rig has been developed. It consi…